Announcement of Discontinuation

Announcement of SUZAKU Series Discontinuation > more


Howto : Logging into the SUZAKU

Relevant products:
SZ010-U00
SZ030-U00
SZ130-SIL
SZ130-U00
SZ310-SIL
SZ310-U00
SZ410-SIL
SZ410-U00
There are two ways of logging into the SUZAKU:
  • Serial console
  • telnet

Logging in via Serial Console

Logging in via the serial console of course requires serial terminal software.  If using a Linux based operating system, Minicom can be used.  

After setting the SUZAKU to auto boot mode and  turning it on, the Linux boot log will be displayed on the terminal screen.  At the end of the boot log, a login prompt will be displayed.  As only the root user account has been created under the default settings, use this account to login. The root user password is also set to "root".  An example of the login prompt:


SUZAKU login: root
Password: 

BusyBox v0.60.5 (2004.04.28-03:25+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.                                   

#

Loggin in via telnet

As telnetd is enabled by default on the SUZAKU, it is possible to login via telnet from your PC.    However, as the SUZAKU is also set to use DHCP to acquire an IP address, you must find out this address by either first logging into the SUZAKU via the serial console and running the ifconfig command, or checking the DHCP server logs.  Of course, it is also possible to set a static IP address. 

Start telnet on your PC, specifying the IP address of the SUZAKU.  After connecting, a login prompt will be displayed and you will be able to login as the root user with "root" as the password.  The following example assumes an IP address of 192.168.1.10:


$ telnet 192.168.1.10
Trying 192.168.1.10...
Connected to 192.168.1.10.
Escape character is '^]'.
login: root
Password: 

BusyBox v0.60.5 (2004.04.28-03:25+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

#
Categories: