Howtos - Software
Howto : Writing to Flash memory with NetFlash
Created: 2005/07/29 | Updated: 2008/09/17
The SUZAKU Flash memory can be written to using the Linux application, Netflash.
Howto : Writing to Flash memory with Hermit
Created: 2005/07/29 | Updated: 2008/09/17
A bootloader called Hermit is used as a second stage bootloader in SUZAKU, and can be used to write to Flash memory.
Howto : Writing to Flash memory - Motorola S Format
Created: 2005/07/29 | Updated: 2008/09/17
Downloading with Motorola S format is a final means to write to Flash memory when it is no longer possible to do so from software. It can be used even when Linux and Hermit will not boot.
Howto : Using NFS for the Root File System
Created: 2005/07/29 | Updated: 2008/09/17
Here, the root file system will be mounted via nfs. The following explanation assumes the next three systems are connected to the network...
Howto : Logging into the SUZAKU
Created: 2005/07/20 | Updated: 2008/09/17
There are two ways of logging into the SUZAKU...
Howto : Linux Development Environment Dependencies
Created: 2007/03/28 | Updated: 2008/09/12
About the development tool combinations used for SUZAKU software development.
Howto : Configuration changes
Created: 2005/07/29 | Updated: 2008/09/12
Making configuration changes and saving settings with SUZAKU.
Howto : Assigning a static IP address
Created: 2005/07/29 | Updated: 2008/09/17
While under default settings SUZAKU attempt to obtain an IP address via DHCP, there are times when the SUZAKU must be given a static IP address. This can be achieved by following the steps below.